Additional Options

If you're interested in a complex command with lots of options, rpm -e is not the place to look. There just aren't that many different ways to erase a package! But there are a few options you should know about.

--test — Go Through the Process of Erasing the Package, But Do Not Erase It

If you're a bit gun-shy about erasing a package, you can use the --test option first to see what rpm -e would do:
# rpm -e --test bother
removing these packages would break dependencies:
        bother >= 3.1 is needed by blather-7.9-1
#
          

It's pretty easy to see that the blather package wouldn't work very well if bother were erased. To be fair, however, RPM wouldn't have erased the package in this example unless we used the --nodeps option, which we'll discuss shortly.

However, if there are no problems erasing the package, you won't see very much:
# rpm -e --test eject
#
          

We know, based on previous experience, that -v doesn't give us any additional output with rpm -e. However, we do know that -vv works wonders. Let's see what it has to say:
# rpm -evv --test eject
D: uninstalling record number 286040
D: running preuninstall script (if any)
D: would remove files test = 1
D: /usr/man/man1/eject.1 - would remove
D: /usr/bin/eject - would remove
D: running postuninstall script (if any)
D: would remove database entry
#
          

As you can see, the output is similar to that of a regular erase command using the -vv option, with the following exceptions:

By using --test in conjunction with -vv, it's easy to see exactly what RPM would do during an actual erase.

--nodeps: Do Not Check Dependencies Before Erasing Package

It's likely that one day while erasing a package, you'll see something like this:
# rpm -e bother
removing these packages would break dependencies:
        bother >= 3.1 is needed by blather-7.9-1
#
          

What happened? The problem is that one or more of the packages installed on your system require the package you're trying to erase. Without it, they won't work properly. In our example, the blather package won't work properly unless the bother package (and more specifically, bother version 3.1 or later) is installed. Since we're trying to erase bother, RPM aborted the erasure.

Now, 99 times out of 100, this is exactly the right thing for RPM to do. After all, if the package is needed by other packages, why try to erase it? As with everything else in life, there are exceptions to the rule. And that is why there is a --nodeps option.

Adding the --nodeps options to an erase command directs RPM to ignore any dependency-related problems, and to erase the package. Going back to our example above, let's add the --nodeps option to the command line and see what happens:
# rpm -e --nodeps bother
#
          

The package was erased without a peep. Whether the blather package will work properly is another matter. In general, it's not a good idea to use --nodeps to get around dependency problems. The package builders included the dependency requirements for a reason, and it's best not to second-guess them.

--noscripts — Do Not Execute Pre- and Post-uninstall Scripts

In the section called Getting More Information With -vv, we used the -vv option to see what RPM was actually doing when it erased a package. We noted that there were two scripts, a pre-uninstall and a post-uninstall, that were used to execute commands required during the process of erasing a package.

The --noscripts option prevents these scripts from being executed during an erase. This is a very dangerous thing to do! The --noscripts option is really meant for package builders to use during the development of their packages. By preventing the pre- and post-uninstall scripts from running, a package builder can keep a buggy package from bringing down their development system. Once the bugs are found and eliminated, there's very little need to prevent these scripts from running; in fact, doing so can cause problems!

--rcfile <rcfile> — Read <rcfile> For RPM Defaults

The --rcfile option is used to specify a file containing default settings for RPM. Normally, this option is not needed. By default, RPM uses /etc/rpmrc and a file named .rpmrc located in your login directory.

This option would be used if there was a need to switch between several sets of RPM defaults. Software developers and package builders will normally be the only people using the --rcfile option. For more information on rpmrc files, see Appendix B.

--root <path> — Use <path> As the Root

Adding --root <path> to an install command forces RPM to assume that the directory specified by <path> is actually the "root" directory. The --root option affects every aspect of the install process, so pre- and post-install scripts are run with <path> as their root directory (using chroot(2), if you must know). In addition, RPM expects its database to reside in the directory specified by the dbpath rpmrc file entry, relative to <path>. [1]

Normally this option is only used during an initial system install, or when a system has been booted off a "rescue disk" and some packages need to be re-installed.

--dbpath <path>: Use <path> To Find RPM Database

In order for RPM to do its handiwork, it needs access to an RPM database. Normally, this database exists in the directory specified by the rpmrc file entry, dbpath. By default, dbpath is set to /var/lib/rpm.

Although the dbpath entry can be modified in the appropriate rpmrc file, the --dbpath option is probably a better choice when the database path needs to be changed temporarily. An example of a time the --dbpath option would come in handy is when it's necessary to examine an RPM database copied from another system. Granted, it's not a common occurrence, but it's difficult to handle any other way.

Notes

[1]

For more information on rpmrc file entries, see Appendix B.