GNU Octave Manual Version 3 by John W. Eaton, David Bateman, Søren Hauberg Paperback (6"x9"), 568 pages ISBN 095461206X RRP £24.95 ($39.95) |
29 Signal Processing
This chapter describes the signal processing and fast fourier transform functions available in Octave. Fast fourier transforms are computed with the fftw or Fftpack libraries depending on how Octave is built.
29.1 Fast Fourier Transforms
- Loadable Function: fft (a, n, dim)
- Compute the FFT of a. The FFT is calculated along the first non-singleton dimension of the
array. Thus if a is a matrix,
fft (a)
computes the FFT for each column of a.If called with two arguments, n is expected to be an integer specifying the number of elements of a to use, or an empty matrix to specify that its value should be ignored. If n is larger than the dimension along which the FFT is calculated, then a is resized and padded with zeros. Otherwise, if n is smaller than the dimension along which the FFT is calculated, then a is truncated.
If called with three arguments, dim is an integer specifying the dimension of the matrix along which the FFT is performed
See also ifft, fft2, fftn, fftw
- Loadable Function: ifft (a, n, dim)
- Compute the inverse FFT of a. The inverse FFT is calculated along the first non-singleton dimension
of the array. Thus if a is a matrix,
fft (a)
computes the inverse FFT for each column of a.If called with two arguments, n is expected to be an integer specifying the number of elements of a to use, or an empty matrix to specify that its value should be ignored. If n is larger than the dimension along which the inverse FFT is calculated, then a is resized and padded with zeros. Otherwise, ifn is smaller than the dimension along which the inverse FFT is calculated, then a is truncated.
If called with three arguments, dim is an integer specifying the dimension of the matrix along which the inverse FFT is performed
See also fft, ifft2, ifftn, fftw
- Loadable Function: fft2 (a, n, m)
- Compute the two-dimensional FFT of a. The optional arguments n and m may be used specify the
number of rows and columns of a to use. If either of these is
larger than the size of a, a is resized and padded with
zeros.
If a is a multi-dimensional matrix, each two-dimensional sub-matrix of a is treated separately
See also ifft2, fft, fftn, fftw
- Loadable Function: fft2 (a, n, m)
- Compute the inverse two-dimensional FFT of a. The optional arguments n and m may be used specify the
number of rows and columns of a to use. If either of these is
larger than the size of a, a is resized and padded with
zeros.
If a is a multi-dimensional matrix, each two-dimensional sub-matrix of a is treated separately
See also fft2, ifft, ifftn, fftw
- Loadable Function: fftn (a, size)
- Compute the N-dimensional FFT of a. The optional vector argument size may be used specify the
dimensions of the array to be used. If an element of size is
smaller than the corresponding dimension, then the dimension is
truncated prior to performing the FFT. Otherwise if an element
of size is larger than the corresponding dimension a
is resized and padded with zeros.
See also ifftn, fft, fft2, fftw
- Loadable Function: ifftn (a, size)
- Compute the inverse N-dimensional FFT of a. The optional vector argument size may be used specify the
dimensions of the array to be used. If an element of size is
smaller than the corresponding dimension, then the dimension is
truncated prior to performing the inverse FFT. Otherwise if an element
of size is larger than the corresponding dimension a
is resized and padded with zeros.
See also fftn, ifft, ifft2, fftw
- Function File: fftconv (a, b, n)
- Return the convolution of the vectors a and b, as a vector
with length equal to the
length (a) + length (b) - 1
. If a and b are the coefficient vectors of two polynomials, the returned value is the coefficient vector of the product polynomial.The computation uses the FFT by calling the function
fftfilt
. If the optional argument n is specified, an N-point FFT is used.
- Function File: fftfilt (b, x, n)
-
With two arguments,
fftfilt
filters x with the FIR filter b using the FFT.Given the optional third argument, n,
fftfilt
uses the overlap-add method to filter x with b using an N-point FFT.If x is a matrix, filter each column of the matrix.
- Loadable Function: method = fftw ('planner')
- Loadable Function: fftw ('planner', method)
- Loadable Function: wisdom = fftw ('dwisdom')
- Loadable Function: wisdom = fftw ('dwisdom', wisdom)
-
This function is specific to FFTW. It is used to manage FFTW's precomputed tables known as wisdom, which impose an initial cost but significantly increase the speed of FFTW. The wisdom used by Octave can be manipulated with the function
fftw
. For examplewisdom = fftw ('dwisdom')
will save the existing wisdom used by Octave to the string wisdom. This string can then be saved in the usual manner. This existing wisdom can be reimported as follows
fftw ('dwisdom', wisdom)
If wisdom is an empty matrix, then the wisdom used is cleared.
During the calculation of fourier transforms further wisdom is generated. The fashion in which this wisdom is generated is equally controlled by the fftw function. There are five different manners in which the wisdom can be treated, these being
- 'estimate'
- This specifies that no run-time measurement of the optimal means of calculating a particular is performed, and a simple heuristic is used to pick a (probably sub-optimal) plan. The advantage of this method is that there is little or no overhead in the generation of the plan, which is appropriate for a fourier transform that will be calculated once.
- 'measure'
- In this case a range of algorithms to perform the transform is considered and the best is selected based on their execution time.
- 'patient'
- This is like 'measure', but a wider range of algorithms is considered.
- 'exhaustive'
- This is like 'measure', but all possible algorithms that may be used to treat the transform are considered.
- 'hybrid'
- As run-time measurement of the algorithm can be expensive, this is a compromise where 'measure' is used for transforms up to the size of 8192 and beyond that the 'estimate' method is used.
The default method is 'estimate', and the method currently being used can be probed with
method = fftw ('planner')
and the method used can be set using
fftw ('planner', method)
Note that calculated wisdom will be lost when restarting Octave. However, the wisdom data can be reloaded if it is saved to a file as described above. Also, any system-wide wisdom file that has been found will also be used. Saved wisdom files should not be used on different platforms since they will not be efficient and the point of calculating the wisdom is lost.
See also fft, ifft, fft2, ifft2, fftn, ifftn
29.2 Filters and Windowing Functions
- Function File: detrend (x, p)
- If x is a vector,
detrend (x, p)
removes the best fit of a polynomial of order p from the data x.If x is a matrix,
detrend (x, p)
does the same for each column in x.The second argument is optional. If it is not specified, a value of 1 is assumed. This corresponds to removing a linear trend.
- Loadable Function: y = filter (b, a, x)
- Loadable Function: [y, sf] = filter (b, a, x, si)
- Loadable Function: [y, sf] = filter (b, a, x, [], dim)
- Loadable Function: [y, sf] = filter (b, a, x, si, dim)
- Return the solution to the following linear, time-invariant difference
equation:
N M SUM a(k+1) y(n-k) = SUM b(k+1) x(n-k) for 1<=n<=length(x) k=0 k=0
where N=length(a)-1 and M=length(b)-1.
over the first non-singleton dimension of x or over dim if supplied. An equivalent form of this equation is:
N M y(n) = - SUM c(k+1) y(n-k) + SUM d(k+1) x(n-k) for 1<=n<=length(x) k=1 k=0
where c = a/a(1) and d = b/a(1).
If the fourth argument si is provided, it is taken as the initial state of the system and the final state is returned as sf. The state vector is a column vector whose length is equal to the length of the longest coefficient vector minus one. If si is not supplied, the initial state vector is set to all zeros.
In terms of the z-transform, y is the result of passing the discrete- time signal x through a system characterized by the following rational system function:
M SUM d(k+1) z^(-k) k=0 H(z) = ---------------------- N 1 + SUM c(k+1) z^(-k) k=1
- Function File: y = filter2 (b, x)
- Function File: y = filter2 (b, x, shape)
- Apply the 2-D FIR filter b to x. If the argument
shape is specified, return an array of the desired shape.
Possible values are:
- 'full'
- pad x with zeros on all sides before filtering.
- 'same'
- unpadded x (default)
- 'valid'
- trim x after filtering so edge effects are no included.
Note this is just a variation on convolution, with the parameters reversed and b rotated 180 degrees.
See also conv2
- Function File: [h, w] = freqz (b, a, n, "whole")
- Return the complex frequency response h of the rational IIR filter
whose numerator and denominator coefficients are b and a,
respectively. The response is evaluated at n angular frequencies
between 0 and
2*pi.
The output value w is a vector of the frequencies.
If the fourth argument is omitted, the response is evaluated at frequencies between 0 and pi.
If n is omitted, a value of 512 is assumed.
If a is omitted, the denominator is assumed to be 1 (this corresponds to a simple FIR filter).
For fastest computation, n should factor into a small number of small primes.
- Function File: h = freqz (b, a, w)
- Evaluate the response at the specific frequencies in the vector w.
The values for w are measured in radians.
- Function File: [...] = freqz (..., Fs)
- Return frequencies in Hz instead of radians assuming a sampling rate
Fs. If you are evaluating the response at specific frequencies
w, those frequencies should be requested in Hz rather than radians.
- Function File: freqz (...)
- Plot the pass band, stop band and phase response of h rather than returning them.
- Function File: freqz_plot (w, h)
- Plot the pass band, stop band and phase response of h.
- Function File: sinc (x)
- Return sin(pi*x)/(pi*x).
- Function File: b = unwrap (a, tol, dim)
-
Unwrap radian phases by adding multiples of 2*pi as appropriate to remove jumps greater than tol. tol defaults to pi.
Unwrap will unwrap along the first non-singleton dimension of a, unless the optional argument dim is given, in which case the data will be unwrapped along this dimension
- Function File: [a, b] = arch_fit (y, x, p, iter, gamma, a0, b0)
- Fit an ARCH regression model to the time series y using the
scoring algorithm in Engle's original ARCH paper. The model is
y(t) = b(1) * x(t,1) + ... + b(k) * x(t,k) + e(t), h(t) = a(1) + a(2) * e(t-1)^2 + ... + a(p+1) * e(t-p)^2
in which e(t) is N(0, h(t)), given a time-series vector y up to time t-1 and a matrix of (ordinary) regressors x up to t. The order of the regression of the residual variance is specified by p.
If invoked as
arch_fit (y, k, p)
with a positive integer k, fit an ARCH(k, p) process, i.e., do the above with the t-th row of x given by[1, y(t-1), ..., y(t-k)]
Optionally, one can specify the number of iterations iter, the updating factor gamma, and initial values a0 and b0 for the scoring algorithm.
- Function File: arch_rnd (a, b, t)
- Simulate an ARCH sequence of length t with AR
coefficients b and CH coefficients a. I.e., the result
y(t) follows the model
y(t) = b(1) + b(2) * y(t-1) + ... + b(lb) * y(t-lb+1) + e(t),
where e(t), given y up to time t-1, is N(0, h(t)), with
h(t) = a(1) + a(2) * e(t-1)^2 + ... + a(la) * e(t-la+1)^2
- Function File: [pval, lm] = arch_test (y, x, p)
- For a linear regression model
y = x * b + e
perform a Lagrange Multiplier (LM) test of the null hypothesis of no conditional heteroscedascity against the alternative of CH(p).
I.e., the model is
y(t) = b(1) * x(t,1) + ... + b(k) * x(t,k) + e(t),
given y up to t-1 and x up to t, e(t) is N(0, h(t)) with
h(t) = v + a(1) * e(t-1)^2 + ... + a(p) * e(t-p)^2,
and the null is a(1) = ... = a(p) = 0.
If the second argument is a scalar integer, k, perform the same test in a linear autoregression model of order k, i.e., with
[1, y(t-1), ..., y(t-k)]
as the t-th row of x.
Under the null hypothesis, LM approximately has a chisquare distribution with p degrees of freedom and pval is the p-value (1 minus the CDF of this distribution at LM) of the test.
If no output argument is given, the p-value is displayed.
- Function File: arma_rnd (a, b, v, t, n)
- Return a simulation of the ARMA model
x(n) = a(1) * x(n-1) + ... + a(k) * x(n-k) + e(n) + b(1) * e(n-1) + ... + b(l) * e(n-l)
in which k is the length of vector a, l is the length of vector b and e is gaussian white noise with variance v. The function returns a vector of length t.
The optional parameter n gives the number of dummy x(i) used for initialization, i.e., a sequence of length t+n is generated and x(n+1:t+n) is returned. If n is omitted, n = 100 is used.
- Function File: autocor (x, h)
- Return the autocorrelations from lag 0 to h of vector x. If h is omitted, all autocorrelations are computed. If x is a matrix, the autocorrelations of each column are computed.
- Function File: autocov (x, h)
- Return the autocovariances from lag 0 to h of vector x. If h is omitted, all autocovariances are computed. If x is a matrix, the autocovariances of each column are computed.
- Function File: autoreg_matrix (y, k)
- Given a time series (vector) y, return a matrix with ones in the
first column and the first k lagged values of y in the
other columns. I.e., for t > k,
[1, y(t-1), ..., y(t-k)]
is the t-th row of the result. The resulting matrix may be used as a regressor matrix in autoregressions.
- Function File: bartlett (m)
- Return the filter coefficients of a Bartlett (triangular) window of
length m.
For a definition of the Bartlett window, see e.g. A. V. Oppenheim & R. W. Schafer, Discrete-Time Signal Processing.
- Function File: blackman (m)
- Return the filter coefficients of a Blackman window of length m.
For a definition of the Blackman window, see e.g. A. V. Oppenheim & R. W. Schafer, Discrete-Time Signal Processing.
- Function File: [d, dd] = diffpara (x, a, b)
- Return the estimator d for the differencing parameter of an
integrated time series.
The frequencies from [2*pi*a/t, 2*pi*b/T] are used for the estimation. If b is omitted, the interval [2*pi/T, 2*pi*a/T] is used. If both b and a are omitted then a = 0.5 * sqrt (T) and b = 1.5 * sqrt (T) is used, where T is the sample size. If x is a matrix, the differencing parameter of each column is estimated.
The estimators for all frequencies in the intervals described above are returned in dd. The value of d is simply the mean of dd.
Reference: Brockwell, Peter J. & Davis, Richard A. Time Series: Theory and Methods Springer 1987.
- Function File: durbinlevinson (c, oldphi, oldv)
- Perform one step of the Durbin-Levinson algorithm.
The vector c specifies the autocovariances
[gamma_0, ..., gamma_t]
from lag 0 to t, oldphi specifies the coefficients based on c(t-1) and oldv specifies the corresponding error.If oldphi and oldv are omitted, all steps from 1 to t of the algorithm are performed.
- Function File: fftshift (v)
- Function File: fftshift (v, dim)
- Perform a shift of the vector v, for use with the
fft
andifft
functions, in order the move the frequency 0 to the center of the vector or matrix.If v is a vector of N elements corresponding to N time samples spaced of Dt each, then
fftshift (fft (v))
corresponds to frequenciesf = ((1:N) - ceil(N/2)) / N / Dt
If v is a matrix, the same holds for rows and columns. If v is an array, then the same holds along each dimension.
The optional dim argument can be used to limit the dimension along which the permutation occurs.
- Function File: ifftshift (v)
- Function File: ifftshift (v, dim)
- Undo the action of the
fftshift
function. For even length v,fftshift
is its own inverse, but odd lengths differ slightly.
- Function File: fractdiff (x, d)
- Compute the fractional differences (1-L)^d x where L denotes the lag-operator and d is greater than -1.
- Function File: hamming (m)
- Return the filter coefficients of a Hamming window of length m.
For a definition of the Hamming window, see e.g. A. V. Oppenheim & R. W. Schafer, Discrete-Time Signal Processing.
- Function File: hanning (m)
- Return the filter coefficients of a Hanning window of length m.
For a definition of this window type, see e.g. A. V. Oppenheim & R. W. Schafer, Discrete-Time Signal Processing.
- Function File: hurst (x)
- Estimate the Hurst parameter of sample x via the rescaled range statistic. If x is a matrix, the parameter is estimated for every single column.
- Function File: pp = pchip (x, y)
- Function File: yi = pchip (x, y, xi)
-
Piecewise Cubic Hermite interpolating polynomial. Called with two arguments, the piece-wise polynomial pp is returned, that may later be used with
ppval
to evaluate the polynomial at specific points.The variable x must be a strictly monotonic vector (either increasing or decreasing). While y can be either a vector or array. In the case where y is a vector, it must have a length of n. If y is an array, then the size of y must have the form
[s1, s2, ..., sk, n]
The array is then reshaped internally to a matrix where the leading dimension is given by
s1 * s2 * ... * sk
and each row in this matrix is then treated separately. Note that this is exactly the opposite treatment than
interp1
and is done for compatibility.Called with a third input argument,
pchip
evaluates the piece-wise polynomial at the points xi. There is an equivalence betweenppval (pchip (x, y), xi)
andpchip (x, y, xi)
.See also spline, ppval, mkpp, unmkpp
- Function File: periodogram (x)
- For a data matrix x from a sample of size n, return the periodogram.
- Function File: rectangle_lw (n, b)
- Rectangular lag window. Subfunction used for spectral density estimation.
- Function File: rectangle_sw (n, b)
- Rectangular spectral window. Subfunction used for spectral density estimation.
- Function File: sinetone (freq, rate, sec, ampl)
- Return a sinetone of frequency freq with length of sec
seconds at sampling rate rate and with amplitude ampl.
The arguments freq and ampl may be vectors of common size.
Defaults are rate = 8000, sec = 1 and ampl = 64.
- Function File: sinewave (m, n, d)
- Return an m-element vector with i-th element given by
sin (2 * pi * (i+d-1) / n)
.The default value for d is 0 and the default value for n is m.
- Function File: spectral_adf (c, win, b)
- Return the spectral density estimator given a vector of
autocovariances c, window name win, and bandwidth,
b.
The window name, e.g.,
"triangle"
or"rectangle"
is used to search for a function calledwin_sw
.If win is omitted, the triangle window is used. If b is omitted,
1 / sqrt (length (x))
is used.
- Function File: spectral_xdf (x, win, b)
- Return the spectral density estimator given a data vector x,
window name win, and bandwidth, b.
The window name, e.g.,
"triangle"
or"rectangle"
is used to search for a function calledwin_sw
.If win is omitted, the triangle window is used. If b is omitted,
1 / sqrt (length (x))
is used.
- Function File: spencer (x)
- Return Spencer's 15 point moving average of every single column of x.
- Function File: [y, c] = stft (x, win_size, inc, num_coef, w_type)
- Compute the short-term Fourier transform of the vector x with
num_coef coefficients by applying a window of win_size data
points and an increment of inc points.
Before computing the Fourier transform, one of the following windows is applied:
- hanning
- w_type = 1
- hamming
- w_type = 2
- rectangle
- w_type = 3
The window names can be passed as strings or by the w_type number.
If not all arguments are specified, the following defaults are used: win_size = 80, inc = 24, num_coef = 64, and w_type = 1.
y = stft (x, ...)
returns the absolute values of the Fourier coefficients according to the num_coef positive frequencies.[y, c] = stft (
returns the entire STFT-matrix y and a 3-element vector c containing the window size, increment, and window type, which is needed by the synthesis function.x
, ...)
- Function File: synthesis (y, c)
- Compute a signal from its short-time Fourier transform y and a
3-element vector c specifying window size, increment, and
window type.
The values y and c can be derived by
[y, c] = stft (x , ...)
- Function File: triangle_lw (n, b)
- Triangular lag window. Subfunction used for spectral density estimation.
- Function File: triangle_sw (n, b)
- Triangular spectral window. Subfunction used for spectral density estimation.
- Function File: [a, v] = yulewalker (c)
- Fit an AR (p)-model with Yule-Walker estimates given a vector c
of autocovariances
[gamma_0, ..., gamma_p]
.Returns the AR coefficients, a, and the variance of white noise, v.
ISBN 095461206X | GNU Octave Manual Version 3 | See the print edition |