Warning: the HTML version of this document is generated from Latex and may contain translation errors. In particular, some mathematical expressions are not translated correctly.
Previous Up Next How to Think Like a Computer Scientist Index

Chapter 19

Queues

This chapter presents two ADTs: the Queue and the Priority Queue. In real life, a queue is a line of customers waiting for service of some kind. In most cases, the first customer in line is the next customer to be served. There are exceptions, though. At airports, customers whose flights are leaving soon are sometimes taken from the middle of the queue. At supermarkets, a polite customer might let someone with only a few items go first.

The rule that determines who goes next is called the queueing policy. The simplest queueing policy is called FIFO, for "first-in-first-out." The most general queueing policy is priority queueing, in which each customer is assigned a priority and the customer with the highest priority goes first, regardless of the order of arrival. We say this is the most general policy because the priority can be based on anything: what time a flight leaves; how many groceries the customer has; or how important the customer is. Of course, not all queueing policies are "fair," but fairness is in the eye of the beholder.

The Queue ADT and the Priority Queue ADT have the same set of operations. The difference is in the semantics of the operations: a queue uses the FIFO policy; and a priority queue (as the name suggests) uses the priority queueing policy.

19.1 The Queue ADT

The Queue ADT is defined by the following operations:

__init__
Initialize a new empty queue.
insert
Add a new item to the queue.
remove
Remove and return an item from the queue. The item that is returned is the first one that was added.
isEmpty
Check whether the queue is empty.

19.2 Linked Queue

The first implementation of the Queue ADT we will look at is called a linked queue because it is made up of linked Node objects. Here is the class definition:

class Queue:
  def __init__(self):
    self.length = 0
    self.head = None

  def isEmpty(self):
    return (self.length == 0)

  def insert(self, cargo):
    node = Node(cargo)
    node.next = None
    if self.head == None:
      # if list is empty the new node goes first
      self.head = node
    else:
      # find the last node in the list
      last = self.head
      while last.next: last = last.next
      # append the new node
      last.next = node
    self.length = self.length + 1

  def remove(self):
    cargo = self.head.cargo
    self.head = self.head.next
    self.length = self.length - 1
    return cargo

The methods isEmpty and remove are identical to the LinkedList methods isEmpty and removeFirst. The insert method is new and a bit more complicated.

We want to insert new items at the end of the list. If the queue is empty, we just set head to refer to the new node.

Otherwise, we traverse the list to the last node and tack the new node on the end. We can identify the last node because its next attribute is None.

There are two invariants for a properly formed Queue object. The value of length should be the number of nodes in the queue, and the last node should have next equal to None. Convince yourself that this method preserves both invariants.

19.3 Performance characteristics

Normally when we invoke a method, we are not concerned with the details of its implementation. But there is one "detail" we might want to know     the performance characteristics of the method. How long does it take, and how does the run time change as the number of items in the collection increases?

First look at remove. There are no loops or function calls here, suggesting that the runtime of this method is the same every time. Such a method is called a constant time operation. In reality, the method might be slightly faster when the list is empty since it skips the body of the conditional, but that difference is not significant.

The performance of insert is very different. In the general case, we have to traverse the list to find the last element.

This traversal takes time proportional to the length of the list. Since the runtime is a linear function of the length, this method is called linear time. Compared to constant time, that's very bad.

19.4 Improved Linked Queue

We would like an implementation of the Queue ADT that can perform all operations in constant time. One way to do that is to modify the Queue class so that it maintains a reference to both the first and the last node, as shown in the figure:

The ImprovedQueue implementation looks like this:

class ImprovedQueue:
  def __init__(self):
    self.length = 0
    self.head   = None
    self.last   = None

  def isEmpty(self):
    return (self.length == 0)

So far, the only change is the attribute last. It is used in insert and remove methods:

class ImprovedQueue:
  ...
  def insert(self, cargo):
    node = Node(cargo)
    node.next = None
    if self.length == 0:
      # if list is empty, the new node is head and last
      self.head = self.last = node
    else:
      # find the last node
      last = self.last
      # append the new node
      last.next = node
      self.last = node
    self.length = self.length + 1

Since last keeps track of the last node, we don't have to search for it. As a result, this method is constant time.

There is a price to pay for that speed. We have to add a special case to remove to set last to None when the last node is removed:

class ImprovedQueue:
  ...
  def remove(self):
    cargo     = self.head.cargo
    self.head = self.head.next
    self.length = self.length - 1
    if self.length == 0:
      self.last = None
    return cargo

This implementation is more complicated than the Linked Queue implementation, and it is more difficult to demonstrate that it is correct. The advantage is that we have achieved the goal     both insert and remove are constant time operations.

As an exercise, write an implementation of the Queue ADT using a Python list. Compare the performance of this implementation to the ImprovedQueue for a range of queue lengths.

19.5 Priority queue

The Priority Queue ADT has the same interface as the Queue ADT, but different semantics. Again, the interface is:

__init__
Initialize a new empty queue.
insert
Add a new item to the queue.
remove
Remove and return an item from the queue. The item that is returned is the one with the highest priority.
isEmpty
Check whether the queue is empty.

The semantic difference is that the item that is removed from the queue is not necessarily the first one that was added. Rather, it is the item in the queue that has the highest priority. What the priorities are and how they compare to each other are not specified by the Priority Queue implementation. It depends on which items are in the queue.

For example, if the items in the queue have names, we might choose them in alphabetical order. If they are bowling scores, we might go from highest to lowest, but if they are golf scores, we would go from lowest to highest. As long as we can compare the items in the queue, we can find and remove the one with the highest priority.

This implementation of Priority Queue has as an attribute a Python list that contains the items in the queue.

class PriorityQueue:
  def __init__(self):
    self.items = []

  def isEmpty(self):
    return self.items == []

  def insert(self, item):
    self.items.append(item)

The initialization method, isEmpty, and insert are all veneers on list operations. The only interesting method is remove:

class PriorityQueue:
  ...
  def remove(self):
    maxi = 0
    for i in range(1,len(self.items)):
      if self.items[i] > self.items[maxi]:
        maxi = i
    item = self.items[maxi]
    self.items[maxi:maxi+1] = []
    return item

At the beginning of each iteration, maxi holds the index of the biggest item (highest priority) we have seen so far. Each time through the loop, the program compares the i-eth item to the champion. If the new item is bigger, the value of maxi is set to i.

When the for statement completes, maxi is the index of the biggest item. This item is removed from the list and returned.

Let's test the implementation:

>>> q = PriorityQueue()
>>> q.insert(11)
>>> q.insert(12)
>>> q.insert(14)
>>> q.insert(13)
>>> while not q.isEmpty(): print q.remove()
14
13
12
11

If the queue contains simple numbers or strings, they are removed in numerical or alphabetical order, from highest to lowest. Python can find the biggest integer or string because it can compare them using the built-in comparison operators.

If the queue contains an object type, it has to provide a __cmp__ method. When remove uses the > operator to compare items, it invokes the __cmp__ for one of the items and passes the other as an argument. As long as the __cmp__ method works correctly, the Priority Queue will work.

19.6 The Golfer class

As an example of an object with an unusual definition of priority, let's implement a class called Golfer that keeps track of the names and scores of golfers. As usual, we start by defining __init__ and __str__:

class Golfer:
  def __init__(self, name, score):
    self.name = name
    self.score= score

  def __str__(self):
    return "%-16s: %d" % (self.name, self.score)

__str__ uses the format operator to put the names and scores in neat columns.

Next we define a version of __cmp__ where the lowest score gets highest priority. As always, __cmp__ returns 1 if self is "greater than" other, -1 if self is "less than" other, and 0 if they are equal.

class Golfer:
  ...
  def __cmp__(self, other):
    if self.score < other.score: return  1   # less is more
    if self.score > other.score: return -1
    return 0

Now we are ready to test the priority queue with the Golfer class:

>>> tiger = Golfer("Tiger Woods",    61)
>>> phil  = Golfer("Phil Mickelson", 72)
>>> hal   = Golfer("Hal Sutton",     69)
>>>
>>> pq = PriorityQueue()
>>> pq.insert(tiger)
>>> pq.insert(phil)
>>> pq.insert(hal)
>>> while not pq.isEmpty(): print pq.remove()
Tiger Woods    : 61
Hal Sutton     : 69
Phil Mickelson : 72

As an exercise, write an implementation of the Priority Queue ADT using a linked list. You should keep the list sorted so that removal is a constant time operation. Compare the performance of this implementation with the Python list implementation.

19.7 Glossary

queue
An ordered set of objects waiting for a service of some kind.
Queue
An ADT that performs the operations one might perform on a queue.
queueing policy
The rules that determine which member of a queue is removed next.
FIFO
"First In, First Out," a queueing policy in which the first member to arrive is the first to be removed.
priority queue
A queueing policy in which each member has a priority determined by external factors. The member with the highest priority is the first to be removed.
Priority Queue
An ADT that defines the operations one might perform on a priority queue.
linked queue
An implementation of a queue using a linked list.
constant time
An operation whose runtime does not depend on the size of the data structure.
linear time
An operation whose runtime is a linear function of the size of the data structure.

Warning: the HTML version of this document is generated from Latex and may contain translation errors. In particular, some mathematical expressions are not translated correctly.


Previous Up Next How to Think Like a Computer Scientist Index